Invens H3 Firmware Download: How to Flash and Update Your Phone
If you own an Invens H3 smartphone and want to update its software or fix some issues, you may need to download and flash the Invens H3 firmware. In this article, we will show you how to do that easily and safely using the Smartphone Flash Tool.
invens h3 firmware download
What is Invens H3 and why do you need firmware?
Invens H3 is a budget-friendly Android smartphone that was released in 2022. It has a 5.0-inch IPS display, a quad-core processor, 2GB of RAM, 16GB of internal storage, a 5MP rear camera, a 5MP front camera, a fingerprint sensor, and a 2500 mAh battery. It runs on Android 11 operating system.
Firmware is the software that controls the hardware and functions of your phone. It is also known as stock ROM or flash file. Firmware can be updated or flashed for various reasons, such as:
Upgrading or downgrading your phone's Android version
Fixing bugs or errors on your phone
Improving your phone's performance or battery life
Unbricking your phone if it is stuck on boot loop or logo
Restoring your phone to factory settings
Removing FRP lock or Google account verification
Changing your phone's IMEI number or network settings
How to download Invens H3 firmware
Sources of Invens H3 firmware
There are many websites that offer Invens H3 firmware files for free download. Some of them are:
Website
URL
Android MTK
[Download Invens Stock ROM for all models (Latest Firmware)](^1^)
Firmware Oficial
[Download Firmware for Invens](^2^)
cfixer
[invens h33 spd flash cm2](^7^)
You can also search for other sources online using keywords like "invens h3 firmware download" or "invens h3 flash file download". However, be careful not to download any corrupted or malicious files that may harm your phone.
invens h3 flash file download
invens h3 stock rom download
invens h3 firmware update
invens h3 flash tool download
invens h3 firmware free download
how to flash invens h3 firmware
invens h3 firmware file download
invens h3 official firmware download
invens h3 custom rom download
invens h3 firmware zip download
invens h3 firmware latest version
invens h3 firmware download link
invens h3 firmware original
invens h3 firmware android 9
invens h3 firmware android 10
invens h3 firmware android 11
invens h3 firmware android 12
invens h3 firmware fix
invens h3 firmware repair
invens h3 firmware backup
invens h3 firmware restore
invens h3 firmware install
invens h3 firmware tutorial
invens h3 firmware guide
invens h3 firmware solution
invens h3 firmware problem
invens h3 firmware error
invens h3 firmware issue
invens h3 firmware imei fix
invens h3 firmware frp bypass
invens h3 firmware password remove
invens h3 firmware hang on logo fix
invens h3 firmware dead boot repair
invens h3 firmware lcd fix
invens h3 firmware camera fix
invens h3 firmware network fix
invens h3 firmware wifi fix
invens h3 firmware bluetooth fix
invens h3 firmware battery fix
invens h3 firmware performance improve
invens h3 firmware security patch update
invens h3 firmware features unlock
invens h3 firmware root access enable
invens h3 firmware twrp recovery install
best custom rom for invens h3
lineage os for invens h3
pixel experience for invens h3
resurrection remix for invens h3
havoc os for invens h3
How to choose the right firmware file
Before downloading any firmware file, you need to check some information about your phone and the file. This will help you avoid compatibility issues or errors during the flashing process. Here are some things you need to check:
The model number of your phone. You can find it on the back cover of your phone or in the settings menu under "About phone". Make sure the firmware file matches the firmware file name. For example, if your phone model is Invens H3, the firmware file name should be something like "Invens_H3_MT6580_20220222_11.0.zip".
The chipset or CPU of your phone. You can find it in the settings menu under "About phone" or using a third-party app like CPU-Z. Make sure the firmware file is compatible with your phone's chipset. For example, if your phone has a MediaTek MT6580 chipset, the firmware file should have "MT6580" in its name.
The build number or version of your phone's software. You can find it in the settings menu under "About phone" or "Software update". Make sure the firmware file has the same or higher build number or version than your phone's software. For example, if your phone has a build number of "Invens_H3_V1.0_20220222", the firmware file should have "V1.0" or higher in its name.
The file size and format of the firmware file. Make sure the firmware file is not too large or too small for your phone's storage capacity. Also, make sure the firmware file is in a zip or rar format that can be extracted easily.
Once you have checked these information, you can download the firmware file that suits your phone and save it on your computer.
How to flash Invens H3 firmware using Smartphone Flash Tool
Requirements and precautions
Before flashing Invens H3 firmware, you need to prepare some things and follow some precautions. Here are some of them:
A Windows PC or laptop with an internet connection
A USB cable that can connect your phone to your PC
A backup of your phone's data, such as contacts, messages, photos, videos, etc. Flashing will erase all your data on your phone.
A fully charged battery on your phone or at least 50% of battery level
A Smartphone Flash Tool (SP Flash Tool) software that can flash Invens H3 firmware. You can download it from [here] or [here].
A MediaTek USB VCOM driver that can recognize your phone on your PC. You can download it from [here] or [here].
A patience and attention to follow the flashing steps carefully. Do not disconnect your phone or turn off your PC during the flashing process.
Steps to flash Invens H3 firmware
After preparing the requirements and precautions, you can follow these steps to flash Invens H3 firmware:
Extract the downloaded SP Flash Tool zip file and run the flash_tool.exe file as administrator.
Click on the "Download" tab and then click on the "Choose" button under the "Scatter-loading File" section.
Browse and select the scatter file from the extracted Invens H3 firmware folder. The scatter file is a text file that contains the information of all the partitions and files of the firmware.
Make sure all the partitions and files are checked and loaded on the SP Flash Tool window.
Click on the "Download" button at the top of the SP Flash Tool window.
Turn off your phone and remove the battery if possible.
Connect your phone to your PC using the USB cable while holding the volume down or volume up button. This will put your phone in download mode and SP Flash Tool will detect it.
Wait for the flashing process to complete. It may take a few minutes depending on the size of the firmware file.
When you see a green tick mark on the SP Flash Tool window, it means the flashing is done successfully.
Disconnect your phone from your PC and insert the battery if you removed it.
Turn on your phone and enjoy the new firmware.
How to fix common problems after flashing Invens H3 firmware
Sometimes, after flashing Invens H3 firmware, you may encounter some problems on your phone, such as:
Invens H3 hang on logo or boot loop
This means your phone is stuck on the Invens logo screen or keeps restarting itself without booting into Android system. This may happen due to a corrupted or incompatible firmware file, a bad flash, or a wrong scatter file. To fix this problem, you can try these solutions:
Flash another firmware file that is compatible with your phone model, chipset, and build number.
Flash the firmware file again using the "Format All + Download" option on the SP Flash Tool. This will erase all the data and partitions on your phone and flash the firmware file from scratch.
Perform a factory reset or wipe data/cache on your phone using the recovery mode. This will delete all the user data and settings on your phone and restore it to its original state.
Invens H3 dead after flash or no power
This means your phone does not turn on or charge after flashing Invens H3 firmware. This may happen due to a wrong firmware file, a power interruption during the flashing process, or a damaged hardware component. To fix this problem, you can try these solutions:
Charge your phone for at least an hour using a different charger or USB cable. Sometimes, your phone may need some time to recover from the flashing process.
Try to boot your phone into download mode or recovery mode by holding the volume down or volume up button and connecting it to your PC. If SP Flash Tool or your PC can recognize your phone, you can flash another firmware file or restore a backup of your previous firmware.
Take your phone to a professional technician or service center and have them check the hardware components of your phone, such as the battery, the motherboard, the USB port, etc. They may be able to repair or replace them if they are damaged.
Invens H3 IMEI invalid or null
This means your phone does not have a valid IMEI number or it shows null or unknown on the settings menu or when you dial *#06#. This may happen due to a corrupted or missing NVRAM partition, which stores the IMEI and other network settings of your phone. To fix this problem, you can try these solutions:
Restore the NVRAM partition from a backup of your previous firmware using SP Flash Tool. You can find the NVRAM partition in the scatter file of your firmware folder.
Write a new IMEI number on your phone using an IMEI writer tool, such as SN Write Tool, Maui Meta Tool, or Chamelephon. You can find your original IMEI number on the back cover of your phone or on the box of your phone.
Repair the IMEI number on your phone using a professional tool, such as Miracle Box, CM2 Dongle, or NCK Box. You may need a special hardware device or activation to use these tools.
Conclusion
In this article, we have shown you how to download and flash Invens H3 firmware using SP Flash Tool. We have also provided some solutions to fix common problems after flashing Invens H3 firmware. We hope this article has been helpful for you and you have successfully updated or fixed your Invens H3 smartphone. If you have any questions or feedback, please leave them in the comments section below.
FAQs
Q: What is the difference between firmware and custom ROM?
A: Firmware is the official software that comes with your phone from the manufacturer. It is also known as stock ROM or flash file. Custom ROM is an unofficial software that is developed by third-party developers based on Android source code. It may offer more features, customization options, and performance improvements than firmware.
Q: Can I flash Invens H3 firmware without a PC?
A: No, you cannot flash Invens H3 firmware without a PC. You need a PC and a USB cable to connect your phone to SP Flash Tool and flash the firmware file.
Q: How can I backup my Invens H3 firmware before flashing?
A: You can backup your Invens H3 firmware using SP Flash Tool. You need to select the "Readback" tab and then click on the "Add" button. Then, you need to select the range of addresses and partitions that you want to backup from the scatter file of your firmware folder. Then, you need to click on the "Read Back" button and connect your phone to your PC in download mode. SP Flash Tool will create a backup file of your firmware in your PC.
Q: How can I root my Invens H3 after flashing?
A: You can root your Invens H3 after flashing using a root tool, such as Magisk, KingRoot, or SuperSU. You need to download and install the root tool app on your phone and follow its instructions to root your phone.
Q: How can I unroot my Invens H3 after flashing?
A: You can unroot your Invens H3 after flashing by uninstalling the root tool app from your phone or flashing the stock firmware again. You can also use a root uninstaller tool, such as Universal Unroot, Root Uninstaller, or SuperSU Unroot. You need to download and install the root uninstaller tool app on your phone and follow its instructions to unroot your phone. 44f88ac181